Rain Barrel Connector Kit Pack of 2, Rain Barrel Linking Kit & Two 12 Inch Hoses

Description

WADEO Rain Barrel Connector Kit- Pack of 2, Rain Barrel Linking Kit with Two 12 Inch Hoses and Four Brass Bulkhead Tank Fittings
Function:
WADEO rain linking kit is designed for irrigation with rain barrel, not for potable water, not lead free compliant. Collect and conserve rain water, reduce your water bill and use environmentally friendly methods to water your plants and complete your outdoor chores.
Easy to install:
You only need to drill a 27mm or 1-1/16 to 1-1/8 inch hole to install, fix the brass fittings and connect the two barrels by pipe. Fit up to 6mm thickness wall.
Increase Water Storage Capacity:
Overall length of the rain barrel connector hose is 12 inches, it can be easily connected to two rain barrels, letting you increase your rainwater collection capacity. so that form a water collection system which is especially helpful during the dry season.
Package Included:
Four Brass Bulkhead Tank Fittings(3/4"male thread), Two 3/4” Hoses(with 2 Female Garden Hose Connectors). The thread of the bulkhead is longer than the hose's, so you can install it on rain barrels of different thickness.
Attention
: Not for potable water, not lead free compliant.
Installation Procedure
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Connect the hose to the two rain buckets.
This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hand after use.
Longer Length ( 12 inches )
Overall length of hose is 12 inches, it can easy to connect two rain barrels, letting you increase your rainwater collection capacity.
Easy to install
You only need to drill a 27mm hole, fix the brass fittings and connect the two barrels by pipe.
Specification
Material：PVC, Brass
length : 12 inches
Weight : 255g
2 Packs