6pk - Victory Archery RIP TKO Elite 350 Arrows with Blazer Vanes

Description

6pk --
Victory Archery
RIP
Low Torque TKO
Elite
350
Carbon Arrow Shafts with nocks and inserts
***Factory fletched with 2" Blazer Vanes
Victory
RIP TKO Elite
350
Shaft Spine - 0.
350
"
Shaft Weight -
8.7
grains per inch
Inside Diameter - 0.
204
"
Shaft Length - Uncut
The new
RIP
TKO is quite simply the most advanced carbon fiber arrow ever available. If you are looking for maximum kinetic energy, coupled with unmatched penetration, then the new
RIP
TKO is the right arrow choice. Featuring MaxxKe Technology, the outer layer of carbon fiber is oriented at ±45° direction to reduce the twisting force imparted on the arrow during launch. This reduction in torsional deflection greatly increases kinetic energy and accuracy. The bow thereby transfers the maximum designed energy into the arrow for greater long range accuracy and penetration. The
RIP
TKO offers the same legendary speed and accuracy of the original
RIP
with a higher grain weight for maximum killing power. The
RIP
TKO looks like no other arrow on the market because it performs like no other arrow on the market.
100% Hi-Modulus Carbon Fiber For Strength and Durability
Small
Outer Diamater –
For increased speed and penetration with less wind deflection
Nano Ceramic “ICE” Coating Improves Penetration and Allows For Easy Removal From Targets
Shok Aluminum Taper Lock Inserts - 50 grains
RIP
Arrows are sorted to +/-0.5 of grain weight per dozen.
Spine Aligned For Increased Accuracy and Tighter Grouping
Advanced 3K carbon weave for less torque, faster recovery of arrow flight and tighter uniform spine consistency
Straightness: +/- .00
1
"
Weight tolerance: +/- .5 grains
Plastic Nocks (installed) and Victory Shok 50 gr. Aluminum Taper Lock Inserts (not installed) Included
Pin Bu
shings are available but not included in this auction
***Blazer Vane and nock color is dependent on what Victory sends us. All 6 arrows will have the same combination of blazer vane and nock but we can not be certain what color the blazer vanes and nocks will be. (What the factory sends us is what we will send you)
We will cut or cut and insert for no charge. Inserts will not be installed unless you ask us to install them. Please measure your arrow from the inside of the nock groove to the end of the bare shaft (not including the insert). These
RIP TKOs
come with the new
Shok Taper Lock
insert. They will overlap the shaft
about 3/8". Please adjust your measurements accordingly if needed.
Please allow 1 extra day for delivery. Arrows may not be returned if they have been cut.
Please s
end us these instructions
via eBay message using the contact the seller feature after your purchase
and
include a message in your payment in the notes to seller section. If we do not receive cutting or cutting and inserting instructions these will be shipped uncut with inserts loose.